To set up Find-Me / Follow-Me for an extension, complete the following steps:


  1. Open Star2Star Application Framework and log in.

  2. From the top-right side of the screen, click Navigation , and select Settings from the drop-down list.

  3. From the Phone Settings section on the left side of the screen, click Find-Me / Follow-Me.

  1. From the You are applying these settings to drop-down list, select the extension. If multiple numbers are listed, select the appropriate extension. A pop-up message displays and indicates that Find-Me / Follow-Me is disabled for the extension and to activate it, by choosing a setting.

  2. Click the Immediate, Sequential, or All icon for the phone setting to apply. The selected setting is outlined in green.

  1. If the Sequential setting is selected, verify or change the default entries for the following:

  • Ring Duration for your Extension field - Number of seconds to ring the extension before ringing the first defined number. The default setting is 20 seconds, which is about three rings.
  • Play announcement drop-down list - Default announcement that plays for all extensions at a Location while trying to connect to another number. The following options are available:
    • Location Default - Uses Location based default from the Star2Star® portal.
    • Yes - Plays the full length of the default announcement.
    • No - Does not play any announcement.
    • Short Version - Plays a shorter version of the default announcement.

  1. Click the first line and click Edit .

  1. Select a name/number from the Name drop-down list, or select Custom Entry and enter a name and number in the applicable fields.

Note: To populate the Name drop-down list, in the Profile section on the left side of the screen, click User Info. Scroll to the Phone Numbers section and add the applicable names and numbers.

  1. In the Ring Duration (sec) field, enter the number of seconds to ring the number. If this field is left blank, the 20 second default setting (about three rings) is applied.

  2. Click Save  to save the entries.

  3. Repeat the appropriate steps above to add additional numbers, if necessary.

 

Changing Find-Me / Follow-Me for an Extension

To change Find-Me / Follow-Me settings for an extension, complete the following steps:

  1. Open Star2Star Application Framework and log in.

  2. From the top-right side of the screen, click Navigation , and select Settings from the drop-down list.

  3. From the Phone Settings section on the left side of the screen, click Find-Me / Follow-Me.

  1. From the You are applying these settings to drop-down list, select the extension. If multiple numbers are listed, select the appropriate extension.

  2. To apply a different setting, click the shaded-gray icon for the applicable phone setting. To turn off the selected phone setting, click the shaded-gray None icon. The setting selection is outlined in green.

  1. To edit a name, number, and/or ring duration, complete the following steps:

  • Click the appropriate line and click Edit .

  • Make the necessary changes.

  • Click Save  to save the changes.

Note: To close editing without saving changes, click Close .

  1. To add a new number, complete the following steps:

  • Click the appropriate blank line and click Edit .

  • Select a name/number from the Name drop-down list, or select Custom Entry and enter a name and number in the applicable fields.

Note: To populate the Name drop-down list, in the Profile section on the left side of the screen, click User Info. Scroll to the Phone Numbers section and add the applicable names and numbers.

  • In the Ring Duration (sec) field, enter the number of seconds to ring the number. If this field is left blank, the 20 second default setting (about three rings) is applied.
  • Click Save  to save the the entries.

8. To delete a number, click the appropriate line and click Delete .

Note: The number is removed immediately without asking the user to confirm the deletion.